Development of residual thermal stress-relieving structure of CFC monoblock target for JT-60SA divertor

Tsuru, Daigo; Sakurai, Shinji; Nakamura, Shigetoshi; Ozaki, Hidetsugu; Seki, Yohji; Yokoyama, Kenji; Suzuki, Satoshi

Fusion Engineering and Design, 98-99, p.1403 - 1406, 2015/10

https://doi.org/10.1016/j.fusengdes.2015.02.052

Experimental examination of heat removal limitation of screw cooling tube at high pressure and temperature conditions

Ezato, Koichiro; Suzuki, Satoshi; Dairaku, Masayuki; Akiba, Masato

Fusion Engineering and Design, 81(1-7), p.347 - 354, 2006/02

https://doi.org/10.1016/j.fusengdes.2005.06.360

no abstracts in English

Study of plasma termination using high-Z noble gas puffing in the JT-60U tokamak

Bakhtiari, M.; Tamai, Hiroshi; Kawano, Yasunori; Kramer, G. J.*; Isayama, Akihiko; Nakano, Tomohide; Kamiya, Kensaku; Yoshino, Ryuji; Miura, Yukitoshi; Kusama, Yoshinori; et al.

Nuclear Fusion, 45(5), p.318 - 325, 2005/05

https://doi.org/10.1088/0029-5515/45/5/002

In the previous works we had shown that injecting a mixture of large amounts of hydrogen and small amounts of argon can terminate a tokamak discharge quickly with avoiding runaway electron generation. In this work we have done the same experiments but with different gases in addition to argon. In fact we compared the effect of the puffing of argon, krypton, and xenon gases with and without simultaneous hydrogen gas puffing on disruption mitigation. We observed that injecting all impurities in the form of an admixture in hydrogen lead to faster plasma shutdowns with less runaway electron generation. We also found that injecting krypton gas (with or without hydrogen) seems to be a good candidate for plasma shutdown purposes since it induces low heat flux to divertor plates and avoids runaway electron generation more effectively.

Development of ITER divertor vertical target with annular flow concept, 2; Development of brazing technique for CFC/CuCrZr joint and heating test of large-scale mock-up

Ezato, Koichiro; Dairaku, Masayuki; Taniguchi, Masaki; Sato, Kazuyoshi; Suzuki, Satoshi; Akiba, Masato; Ibbott, C.*; Tivey, R.*

Fusion Science and Technology, 46(4), p.530 - 540, 2004/12

https://doi.org/10.13182/FST04-A588

The first fabrication and heating test of a large-scale CFC monoblock divertor mock-up using annular flow concept have been performed to demonstrate its manufacturability and thermo-mechanical performance. Prior to the fabrication of the mock-up, brazed joint tests between the CFC monoblock and the CuCrZr tube have been carried out to find the suitable heat treatment mitigating loss of the high mechanical strength of the CuCrZr material. Basic mechanical examination on CuCrZr undergoing the brazing heat treatment and FEM analyses are also performed to support the design of the mock-up. High heat flux tests on the large-scale divertor mock-up have been performed in an ion beam facility. The mock-up has successfully withstood more than 1,000 thermal cycles of for 15 s and 3,000 cycles more than for 15 s, which simulates the heat load condition of the ITER divertor. No degradation of the thermal performance of the mock-up has been observed throughout the thermal cycle test.

Thermal fatigue experiment of screw cooling tube under one-sided heating condition

Ezato, Koichiro; Suzuki, Satoshi; Sato, Kazuyoshi; Akiba, Masato

Journal of Nuclear Materials, 329-333(1), p.820 - 824, 2004/08

https://doi.org/10.1016/j.jnucmat.2004.04.138

This paper presents thermal fatigue experiments of a cooling tube with a helical triangular fin on its inner cooled surface, namely a . The screw thread is directly shaped in a CuCrZr heat sink bar as a cooling channel. Slits with the width of 1.5 mm are machined at the heated side of the heat sink. The thermal fatigue experiments are carried out at 20 and 30 by using an electron beam irradiation facility in JAERI. Water leakages from fatigue cracks, which locate at the slit of the heat sink, occurred at around 4500th and 1400th cycles at 20 and 30 , respectively. These results show good agreement with lifetime predictions using Manson-Coffin's law based on finite element analyses. Fractographic observations reveal that the fatigue cracks start from the outer heated surface at the slit region of the cooling channel and propagate toward its inner surface.

Microstructural development and radiation hardening of neutron irradiated Mo-Re alloys

Nemoto, Yoshiyuki; Hasegawa, Akira*; Sato, Manabu*; Abe, Katsunori*; Hiraoka, Yutaka*

Journal of Nuclear Materials, 324(1), p.62 - 70, 2004/01

https://doi.org/10.1016/j.jnucmat.2003.09.007

In this study, stress-relieved specimens and recrystallized specimens of pure Mo and Mo-Re alloys (Re content=2,4,5,10,13 and 41wt%) were neutron irradiated up to 20dpa at various temperatures (681-1072K). On microstructure observation, sigma phase and chi phase precipitates were observed in all irradiated Mo-Re alloys. Voids were observed in all irradiated specimen, and dislocation loops and dislocations were observed in the specimens that were irradiated at lower temperatures. On Vickers hardness testing, all of the irradiated specimens showed hardening. Especially Mo-41Re were drastically embrittled after irradiation at 874K or less. From these results, authors discuss about relation between microstructure development and radiation hardening, embrittlement, and propose the most efficient Re content and thermal treatment for Mo-Re alloys to be used under irradiation condition.

Present research status on divertor and plasma facing components for fusion power plants

Suzuki, Satoshi; Ueda, Yoshio*; Tokunaga, Kazutoshi*; Sato, Kazuyoshi; Akiba, Masato

Fusion Science and Technology, 44(1), p.41 - 48, 2003/07

https://doi.org/10.13182/FST03-A308

no abstracts in English

Wall conditioning and experience of the carbon-based first wall in JT-60U

Masaki, Kei; Yagyu, Junichi; Arai, Takashi; Kaminaga, Atsushi; Kodama, Kozo; Miya, Naoyuki; Ando, Toshiro; Hiratsuka, Hajime; Saido, Masahiro

Fusion Science and Technology (JT-60 Special Issue), 42(2-3), p.386 - 395, 2002/09

https://doi.org/10.13182/FST02-A235

The wall conditioning of JT-60U consists of the 300C baking, He-TDC, He-GDC, tokamak discharge cleaning and boronization. Using these methods, total pressure of the vacuum vessel reached finally 10 10 Pa. The oxygen impurity was decreased to 0.5%. The experience with the carbon-based first wall showed that taper shaping is effective to reduce the local heat concentration to the tile edges. The observed poloidal asymmetric deposition of carbon on the divertor region implies that the carbon impurity produced in the outer divertor contributes to the deposition on the inner divertor. In 1992 and 1993, the BC converted CFC tiles were installed in the outer divertor to reduce chemical sputtering of CFC tiles and oxygen impurity. The reduction was successfully demonstrated with the BC converted CFC tiles. In order to understand the tritium behavior in JT-60U, tritium in the first wall and the exhaust gas were measured. The estimated tritium inventory in the first wall was 50% of the generated tritium.

DSCu/SUS joining techniques development and testing

Sato, Satoshi; Hatano, Toshihisa; Furuya, Kazuyuki; Kuroda, Toshimasa*; Enoeda, Mikio; Takatsu, Hideyuki

JAERI-Research 97-092, 80 Pages, 1998/01

JAERI-Research-97-092.pdf:5.11MB

no abstracts in English

Development of divertor plate with CFCs bouded onto DSCu cooling tube for fusion reactor application

; *; Araki, Masanori; Nakamura, Kazuyuki; Akiba, Masato

Journal of Nuclear Materials, 258-263, p.318 - 322, 1998/00

https://doi.org/10.1016/S0022-3115(98)00231-1

no abstracts in English